@article { author = {مجدی, عباس and لیتکوهی, سیاوش and آبادی, مهدی حاجیان حسین}, title = {Deep Mixing Method As A Means of Improving Strength Properties of Sandy Soils at Zaytoon2 Project in Bandar Abbas City}, journal = {University College of Engineering}, volume = {42}, number = {5}, pages = {-}, year = {2008}, publisher = {}, issn = {0803-1026}, eissn = {}, doi = {}, abstract = {In deep mixing method lime or cement and or a combination of the two are mixed with in-situ soils by means of an auger to improve the strength properties of the soils. Strength of the improved soils may be evaluated in different ways, so that, the uniaxial compressive strength assessment is one of the most commonly used methods. The project site is located at Zaytoon 2 in Bandar Abbas City. In order to make the excavation of the sandy soils feasible and to mitigate the liquefaction potential hazard, deep mixing method was employed. In an attempt to establish a relation between strength properties of cement grout (cement + water) and the soil-cement mixed (cement grout + soils) two types of grouts; "A" and "B" with different admixtures were used. Type "A" with a water/cement ratio (w/c) = 0.8, where no bentonite was added, whilst in grout Type "B" the ratio w/c = 1.0, with 3% (by cement weight) and bentonite was added. In order to evaluate the strength properties of the grout and soil-cement, some representative samples were obtained. The 7 and 14 days cured samples were tested under uniaxial compressive loading condition. Several in-situ samples were also taken for reliability and quality control purposes. Comparative study of the results revealed that the rate of strength increase in grout type "B", due to using bentonite, is low as compared with the grout type "A". The relationship of uniaxial compressive strength and modulus of elasticity with both density and with the final strain of soil-cement mixed were investigated. Finally, based on the results of uniaxial compressive strength of cement grout, an empirical equation to predict the uniaxial compressive strength of soil-cement mixed has been suggested. The predicted strength was compared with the strength of in-situ samples. It has proven that the prediction method can be used as a reliable approach for determination of the uniaxial compressive strength of soil-cement mixed.}, keywords = {Admixture,Bandar Abbas city,Cement Grout,Deep Mixing,Modulus of elasticity,Uniaxial compressive strength,Zeytoon 2 Project Site}, title_fa = {روش اختلاط عمیق جهت بهبود خواص مقاومتی زمین های ماسه‌ای ساختگاه پروژه زیتون 2 در بندرعباس}, abstract_fa = {در روش اختلاط عمیق با استفاده از اختلاط سیمان یا آهک یا مخلوطی از این دو با خاک، توسط اوگرهای مخلوط کننده، خواص مقاومتی خاک افزایش می یابد. مقاومت خاکهای اصلاح شده با این روش را می توان به طرق مختلف تعیین کرد، به طوری که مقاومت فشاری تک محوری یکی از رایج ترین این آزمایش ها می باشد. در ساختگاه پروژه زیتون 2 واقع در بندرعباس به علت وجود رسوبات ماسه ای به منظور امکان پذیر نمودن گود برداری و کاهش روانگرایی با استفاده از روش اختلاط عمیق دیواره های حایلی ایجاد گردید. برای تعیین ارتباط خواص مکانیکی سیماناب (آب و سیمان) و مخلوط (سیماناب و خاک) و ارتباط بین آنها، دو نوع اختلاط سیماناب A و B با نسبت های مختلف در این پروژه مورد استفاده قرار گرفت: نوع A با نسبت آب به سیمان 8/0 (بدون بنتونیت) و نوع B با نسبت آب به سیمان 1 همراه با 3 درصد وزنی بنتونیت می باشد. به منظور ارزیابی مقاومتی، هم از سیماناب و هم از مخلوط نمونه گیری به عمل آمد. این نمونه ها با زمان های گیرش 7 روزه و 14 روزه مورد آزمایش مقاومت فشاری تک محوری قرار گرفتند. همچنین برای حصول اطمینان از نتایج آنها در چند محل مغزه گیری برجا به عمل آمد. پس از بررسی های صورت گرفته مشاهده شد که در مخلوط حاصل از سیماناب نوع A نرخ افزایش مقاومت بیشتر بوده و نسبت مقاومت به مدول ارتجاعی بالاتر می باشد. ارتباط بین مقاومت و مدول ارتجاعی با چگالی و نیز رابطه بین مقاومت فشاری تک محوری و مدول ارتجاعی با کرنش نهایی مخلوط مورد بررسی قرار گرفت. در نتیجه با استفاده از مقاومت فشاری تک محوری نمونه های حاصل از سیماناب روابط تجربی برای پیش بینی مقاومت مخلوط ارائه گردید. نتایج مقاومت پیش بینی شده با مقایسه مقاومت فشاری تک محوری نمونه های برجا نشان می دهد که می توان روابط تجربی ارائه شده در این مقاله را به عنوان یک روش پیش بینی تقریبی مقاومت مخلوط استفاده نمود.}, keywords_fa = {اختلاط عمیق,بندرعباس,ساختگاه پروژه زیتون 2,سیماناب,مخلوط,مدول ارتجاعی,مقاومت فشاری تک محوری}, url = {https://jfe.ut.ac.ir/article_27148.html}, eprint = {https://jfe.ut.ac.ir/article_27148_1dcdf0512b19c2757fb0b2b76f263431.pdf} }