@article { author = {مزروقی, مهندس ثابت}, title = {Improved genralized method for simulation of deep-bars of cage rotors}, journal = {University College of Engineering}, volume = {49}, number = {0}, pages = {-}, year = {1989}, publisher = {}, issn = {0803-1026}, eissn = {}, doi = {}, abstract = {The presented generalized method for sectionalizing the deep-bar combines two new ideas, namely grading the heights of the bar sections, and grading the areas of the sections. In the particular case of the rectangular bar shape, the generalized method reduce itself to the method of grading of heights. Throughout this paper four sections for the bar have been considered the optimum number, so as to necessitate the availability of only small size and cheap analog computers. Never the less the generalized method has proved successful with different bar stapes, even with this limitation on the number of sections into which the deep-bar is divided. Naturally, this met rod is expected to lead to closer accuracy if ever required, with larger number' of sections.}, keywords = {}, title_fa = {روش کلی مشابه سازی در محاسبه امیدانس میله های روتور قفسه دار با شیار عمیق}, abstract_fa = {روش حاضر برای طبقه بندی شیار عمیق از دو نظریه جدید تشکیل می شود 1-طبقه بندی بر اساس ارتفاعات مقاطع شیار(شمش) 2- طبقه بندی بر اساس سطوح مقاطع در حالت خاص که شکل شیارها را سه گوشه باشند روش عمومی به روش طبقه بندی بر اساس ارتفاعات تبدیل می شود دراین مقاله چهار برش برای شیار در نظر گرفته می شود که تعداد اپتیمم می باشد چون در این صورت یک آنالوگ کامپیوتر ساده با ابعاد کوچک و ارزان کافی است . با وجود این روش کلی حتی با محدودیت فوق الذکر در تعداد برش ها برای اشکال مختلفه شیار جوابهای مطلوبی می دهد . طبعاً روش مذکور با افزایش تعداد برش ها به دقتی مورد نظر خواهید انجامید .}, keywords_fa = {}, url = {https://jfe.ut.ac.ir/article_26248.html}, eprint = {https://jfe.ut.ac.ir/article_26248_35cace2e06751618178a026fe78fd619.pdf} }