@article { author = {آبادی, سعید بداغ and موسوی, مهدی and موسوی, جلال}, title = {-}, journal = {University College of Engineering}, volume = {41}, number = {5}, pages = {-}, year = {2007}, publisher = {}, issn = {0803-1026}, eissn = {}, doi = {}, abstract = {Mansuri oil field, which is located at the South-West of Iran, has sand production problem and primary analyses proved the existence of this phenomenon in this field. Generally, there are three methods to evaluate the sand production state which are empirical, numerical, mathematical, and physical. Considering the numerical capability to analyze complex geometries under high stresses condition, FLAC3D, which is a three-dimensional explicit finite-difference program for engineering mechanics computation, was employed to analyze sand production in this field. First, the numerical model was calibrated using designed physical model and then, producing intervals and their perforations were modeled by numeric software. Its results showed that not only end-perforation instability is not the sole dominant mechanism in sand production, but also the effect of adjacent perforations on each other is more important. In this respect, there is an optimum pressure that causes perforations failure and catastrophic sand production. Mansuri field analyses demonstrated that the downhole pressure at its wells is near predicted optimum pressure and producing intervals are going to catastrophically produce sand.}, keywords = {}, title_fa = {پیش‌بینی تولید ماسه با استفاده از مدلسازی عددی}, abstract_fa = {میدان نفتی منصوری که یکی از میادین نفتی حائز اهمیت در جنوب غرب ایران می‌باشد، سالهاست که با مشکل تولید ماسه مواجه بوده و تحلیلهای اولیه حاکی از وجود این مشکل در میدان مذکور دارد. بطور کلی برای بررسی تولید ماسه در مخازن ماسه‌سنگی تولید کنندة نفت و گاز، روشهای متعددی که شامل روشهای تجربی، روشهای عددی، روشهای فیزیکی و روشهای ریاضی می‌باشند، وجود دارد. با توجه به قابلیتهای مدلهای عددی در مدلسازی هندسه‌های پیچیده و شرایط تنش و فشار بالا، نرم‌افزار FLAC3D که بر مبنای اجزای مجزا بوده و قابلیت مدلسازی هیدرومکانیکی را دارد برای مدلسازی تولید ماسه در این میدان انتخاب شد. مدل عددی ابتدا با استفاده از یک مدل فیزیکی بررسی تولید ماسه کالیبره گردید و سپس مجموعة چاه و سوراخهای موجود در دیوارة آن که مولدهای اصلی نفت می‌باشند تحت آنالیز عددی قرار گرفتند. نتایج نشان داد که ابتدا تولید ماسه از سوراخها صورت می‌گیرد و با تجاوز فشار چاه از حد معینی، مجموعة سوراخها تخریب شده و تولید ماسه در مقیاس وسیع صورت می‌گیرد که نتیجة آن هجوم زون تخریب شده به درون چاه و مسدود کردن کلی آن می‌باشد. انجام آنالیز فوق برای چاههای میدان منصوری نشان داد که چاههای این میدان در آستانة تولید شدید ماسه می‌باشند.}, keywords_fa = {اندرکنش سنگ و سیال,تولید ماسه,مدلسازی عددی}, url = {https://jfe.ut.ac.ir/article_18618.html}, eprint = {https://jfe.ut.ac.ir/article_18618_683d0316466879018b535ea03799171b.pdf} }