@article { author = {منش, سعید حشمتی and بزرگ, سید فرشید کاشانی}, title = {-}, journal = {University College of Engineering}, volume = {33}, number = {1}, pages = {-}, year = {1999}, publisher = {}, issn = {0803-1026}, eissn = {}, doi = {}, abstract = {Microstructural evolution has been investigated in Si containing ? - Ti Al alloys after hot deformation and further annealing. Effective factors in thermomechanical processing such as deformation temperature, deformation ratio, and annealing temperature were studied. Isothermal deformation below the eutectic temperature resulted in inhomogeneous dynamic recrystallisation and fine equiaxed grains were produced in recrystallised areas and residual deformed lamellae elsewhere. During the deformation. the hard eutectic silicides play an important role in destruction of the as cast structure. Also the presence of the eutectic silicides and fine silicides produced by precipitation in the solid state restricts the size of grains produced by dynamic recrystallisation as well as by static recrystallisation on subsequent annealing and results in a fine grained structure.}, keywords = {}, title_fa = {بررسی تأثیر شکل گرم و بازپخت بر ریز ساختار آلیاژهای بین فلزی بر پایه TiAl}, abstract_fa = {در این مقاله تغییرات انجام شده در ریز ساختار آلیاژهای TiAl-? حاوی Si بعد از تغییر شکل گرم و نیز بازپخت مورد بررسی قرار گرفته است. عوامل مؤثر در عملیات ترمومکانیک مثل دمای تغییر شکل،نسبت تغییر شکل و دمای بازپخت مورد مطالعه قرار گرفته اند. تغییر شکل تکدما در دماهای زیرخط یوتکتویید ?+ 2? ? ? منجر به تجدید تبلور دینامیک بصورت غیرهمگن در زمینه آلیاژها شده و دانه های ریز و هم محور در نواحی تجدید تبلور یافته بدست می آید در حالیکه در سایر نواحی ساختار لایه ای ?+ 2? بصورت تغییر شکل یافته باقی می ماند. ملاحظه شده است که در ضمن تغییر شکل،سیلیسایدهای یوتکتیکی سخت،نقش مهمی را در تخریب ساختار ریختگی ایفا می نمایند. همچنین نشان داده شده است که حضور سیلیسایدهای یوتکتیکی و بخصوص سیلیسایدهای ریزی که در محلول جامد رسوب میکنند رشد دانه هایی را که در ضمن تجدید تبلور دینامیکی و نیز تجدید تبلور استاتیکی در حین بازپخت ایجاد میشوند محدود نموده و ساختاری دانه ریز را موجب میشوند.}, keywords_fa = {آلیاژهای بین فلزی,بازپخت,تبلور مجدد,تغییر شکل گرم,تیتانیم آلومیناید,تیتانیم سیلیساید,ریز ساختار,ساختار لایه ای,عملیات ترمومکانیک,مرزهای ضدفاز}, url = {https://jfe.ut.ac.ir/article_15338.html}, eprint = {https://jfe.ut.ac.ir/article_15338_07a75ac54b64cc5c49c6e8b1e1cb311c.pdf} }