@article { author = {نوعپرست, محمد and دلاوریان, مریم}, title = {-}, journal = {University College of Engineering}, volume = {35}, number = {3}, pages = {-}, year = {2001}, publisher = {}, issn = {0803-1026}, eissn = {}, doi = {}, abstract = {Work index is a measure to define ores/minerals grindability which is significantly used in Bond (1952) to calculate the required energy of ores' comminution. Work index for any material is experimentally calculated under specific conditions and it is a certain value. To understand the effect of changing control screen in work index calculation, three different ores Alam-Kuh Pb-Zn ore, Sarcheshmeh Cu ore, and Abe-Gann region Dolomite were tested, using 425, 212, 150 and 100 micron screens (totally 12 sets of tests). Results showed that the work index values increase with the increases of screen size. The relation between root of screen size and fines produced per revolution of mill and also, screen size and size of products out of which 80% passes through this size appeared to be linear for all three different ores. The constants of these linear equations were estimated using regression technique.}, keywords = {}, title_fa = {تأثیر تغییرات اندازه سرند کنترل در محاسبه ضریب کار مواد معدنی}, abstract_fa = {رابطه باند(Bond , 1952) در محاسبه انرژی مورد نیاز خردایش مواد معدنی مورد استفاده است و ضریب کار بیانگر قابلیت خردایش مواد بوده و در رابطه باندبکار می آید. ضریب کار برای هر نوع ماده ای مقداری خاص است،که بصورت آزمایشگاهی –محاسباتی مورد اندازه گیری قرار می گیرد . بمنظور بررسی تغییرات ابعاد دانه ها(اندازه سرند کنترل) در محاسبه ضریب کار،سه نوع ماده معدنی مختلف سرب و روی (الم کوه زنجان) ، مس(سرچشمه کرمان)و دولومیت(منطقه آبگرم قزوین) در چهار اندازه 425 ، 212 ، 150 و 100 میکرون از سرند کنترل مورد استفاده قرار گرفتند. مجموعاً 12 سری آزمایش انجام گرفت که نتایج و محاسبات مربوط دلالت بر افزایش مقدار ضریب کار با افزایش ابعاد دانه ها برای هر سه نوع ماده معدنی دارند. رابطه بین ?pi (اندازه سرند کنترل) وGi (وزن بخشی از ماده که به ازاء هر دور گردش آسیا تا ابعاد کوچکتر از pi خرد میشوند) و همچنینp(ابعاد روزنه سرندی که 80% از محصول آسیا از آن میگذرد) و pi ، خطی بوده و روابط آنها در محدوده اعتباری (از نظر ابعادی)براساس نتایج تجربی و استفاده از روش رگرسیون ارائه شدند.}, keywords_fa = {خردایش,ضریب کار,کانه آرائی}, url = {https://jfe.ut.ac.ir/article_15063.html}, eprint = {https://jfe.ut.ac.ir/article_15063_c56f321f57f918e14acfc9cd74fc160f.pdf} }