@article { author = {پیرهادی, عباس and حکاک, محمد and آرزم, فرخ}, title = {-}, journal = {University College of Engineering}, volume = {38}, number = {1}, pages = {-}, year = {2004}, publisher = {}, issn = {0803-1026}, eissn = {}, doi = {}, abstract = {One of the important parameters to enhance the efficiency of Fresnel Zone Plate Antenna (FZP A) is the phase efficiency. This efficiency deepens on the number of layers in the multi-layer FZP A and dielectric materials in the multi-dielectric FZP A. Because the number of Fresnel Zone is limited by the mechanical and practical restrictions, this efficiency is also related to these parameters. Therefore, to obtain the maximum gain or perform optimum design of FZP A one must choose suitable values for the number of Fresnel zones and their radii, focal length, characteristics of feed and also must consider practical and mechanical restrictions. In this paper, methods for analysis of these structures are first introduced, then, a proper method for analyzing the structure is chosen. Second, for a given FZPA diameter and a given feed with symmetrical radiation pattern, a procedure is introduced to obtain optimum values for the focal length, radii of Fresnel Zones and simulated feed parameter, so that they yield the maximum gain and desired side lobe level of radiation pattern. Finally the simulated and measurement results are compared.}, keywords = {}, title_fa = {طراحی بهینه آنتن FZPA چند لایه با کارآیی بالا}, abstract_fa = {یکی از عوامل مهم درافزایش کارایی آنتن FZPA،ضریب کارایی فاز این نوع ساختاراست. این ضریب متناسب با تعداد لایه های بکار رفته شده در ساختار FZPA چند لایه و تنوع دی الکتریک مورد استفاده در ساختار چند دی الکتریکی بوده و افزایش آن منجربه افزایش کارایی آنتن میشود . البته در افزایش ضریب کارایی فاز باید محدودیتهای عملی و تئوری را نیز مدنظر داشت لذا طراحی بهینه آنتن منوط به انتخاب مناسب پارامترهای آن می باشد. در این مقاله، ضمن معرفی اجمالی روشهای مختلف تحلیل این ساختارها،سعی شده است که در هر قطر مشخص از آنتن روش طراحی مناسبی ارائه شود بطوریکه برای هر تغذیه با پترن تشعشعی متقارن بتوان محل تغذیه و شعاع نواحی را به گونه ای تعیین نمود که حداکثر بهره آنتن حاصل شود. در نهایت نیز با در نظر گرفتن یک تغذیه طراحی مناسب بر مبنای آن ارائه شده ونتایج حاصل از اندازه گیری با نتایج تئوری مربوطه مقایسه میشود.}, keywords_fa = {آنتن FZPA چند دی الکتریک,آنتن FZPA چند لایه,کارایی,نواحی فرنل}, url = {https://jfe.ut.ac.ir/article_14495.html}, eprint = {https://jfe.ut.ac.ir/article_14495_eab33408e06ffcb6154fc92bb731ab41.pdf} }